Hyundai Kona: Convenient features of your vehicle / Windshield defrosting and defogging

WARNING

Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to lower speed.

Information

If the engine temperature is still cold after starting, then a brief engine warm up period may be required for the vented air flow to become warm or hot.

Air Conditioning refrigerant label
The actual Air Conditioning refrigerant label in the vehicle may differ from the illustration. Each symbols and specification on air conditioning refrigerant label means as below: 1. Classification ...

Manual climate control system
To defog inside windshield 1. Select any fan speed except “0” position. 2. Select the desired temperature. 3. Select the or position. 4. The outside (fresh) air will be selected automatically. ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Heater Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Remove the heater co ...

Hyundai Kona (OS) 2018-2025 Service Manual: Side Impact Sensor (SIS) Description and operation
Description • Side Impact Sensors (SIS), each installed on the center part of the right and left front door modules and the right and left center pillars, detects side impact during collision. • The SRSCM uses the signals f ...

© 2018-2025 www.hkona.com