Inspection |
1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Turn the ignition switch ON.
|
3. |
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
|
Hyundai Kona (OS) 2018-2024 Service Manual: Fuel Pressure Sensor (FPS) Description and operation
Description
The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel
pump and measures the pressure in the low pressure fuel line.Based on the fuel
pressure measured by the FPS and the amount of fuel consumed, the fuel pump
control module (FPCM) determ ...
Hyundai Kona (OS) 2018-2024 Owners Manual: Front fog lamp
1. Loosen the pin-type retainers of the under cover and then remove the undercover.
2. Reach your hand into the back of the front bumper.
3. Disconnect the power connector from the socket.
4. Remove the bulb-socket from the housing by turning the socket counterclockwise
until the tabs on the socke ...