Hyundai Kona: Immobilizer System / Antenna Coil Repair procedures

Hyundai Kona (OS) 2018-2026 Service Manual / Body Electrical System / Immobilizer System / Antenna Coil Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the steering column shroud panel. (Refer to Body - "Steering Column Shroud Panel")

3.	Disconnect the 6P connector (A) of the coil antenna and then remove the antenna coil (B) after loosening a screw.

Installation

1.	Install the coil antenna and connect the 6P connector.

2.	Install the steering column shroud panel.

3.	Connect the negative (-) battery terminal.

Immobilizer Control Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body ...

Ignition Switch Assembly

...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Remove the drive airbag module. ...

Hyundai Kona (OS) 2018-2026 Service Manual: Alternator Specifications
Specifications Item Specification Nominal output 13.5V 130A Speed in use 1,000 - 18,000 rpm Regulator Type IC Regulator built in type ECM Interface type reg ...