Hyundai Kona: Charging System / Battery Sensor Description and operation

Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Battery Troubleshooting

Troubleshooting ...

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Turn the ignition switch OFF. 3. Disconnect the batte ...

Other information:

Hyundai Kona (OS) 2018-2021 Owners Manual: LCD display messages
Shift to P (for smart key system and dual clutch transmission) This warning message is displayed if you try to turn off the engine without the shift lever in P (Park) position. At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Engine oil
Checking the engine oil level (Gasoline engine) 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan. 4. Pull the dipstick out, wip ...