Hyundai Kona: Engine Electrical System
- Specifications
- Special service tools
- Ignition System
- Description and operation
- Repair procedures
- Troubleshooting
- Ignition Coil Specifications
- Ignition Coil Description and operation
- Ignition Coil Schematic diagrams
- Ignition Coil Repair procedures
- Spark Plug Specifications
- Spark Plug Description and operation
- Spark Plug Repair procedures
- Charging System
- Components and components location
- Description and operation
- Schematic diagrams
- Repair procedures
- Troubleshooting
- Alternator Specifications
- Alternator Description and operation
- Alternator Components and components location
- Alternator Repair procedures
- DC/DC Converter Description and operation
- DC/DC Converter Components and components location
- DC/DC Converter Schematic diagrams
- DC/DC Converter Repair procedures
- Battery Specifications
- Battery Description and operation
- Battery Repair procedures
- Battery Troubleshooting
- Battery Troubleshooting
- Battery Sensor Description and operation
- Battery Sensor Repair procedures
- Starting System
- Description and operation
- Troubleshooting
- Starter Specifications
- Starter Description and operation
- Starter Schematic diagrams
- Starter Repair procedures
- Starter Relay Repair procedures
- Cruise Control System
Muffler Repair procedures
Removal and Installation
Front Muffler
1.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Enginer Cover")
2.
...
Specifications
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.56 ± 15%
[20° ...
Other information:
Hyundai Kona (OS) 2018-2025 Owners Manual: Instrument panel fuse replacement
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Open the fuse panel cover.
4. Refer to the label on the inside of the fuse panel cover to locate the suspected
fuse location.
5. Pull the suspected fuse straight out. Use the removal tool provided in the
engine compartment fuses panel.
...
Hyundai Kona (OS) 2018-2025 Owners Manual: ESC operation
ESC ON condition
When the ignition switch is in the ON position, the ESC and the ESC OFF indicator
lights illuminate for approximately three seconds and goes off, then the ESC is
turned on.
When operating
When the ESC is in operation, the ESC indicator light blinks:
When you apply your brakes u ...
