Hyundai Kona: Starting System / Starter Specifications

Hyundai Kona (OS) 2018-2024 Service Manual / Engine Electrical System / Starting System / Starter Specifications

Specification

[NON-ISG]

Item		Specification
Rated voltage		12V, 0.9 Kw
The number of pinion teeth		10
Performance [No-load, 11.5V]	Ampere	Max. 60A
	Speed	Min. 5,500 rpm

[ISG]

Item		Specification
Rated voltage		12V, 1.3 Kw
The number of pinion teeth		11
Performance [No-load, 11.5V]	Ampere	Max. 95A
	Speed	Min. 3,400 rpm

Troubleshooting

Troubleshooting Symptom Suspect Area Remedy Engine will not crank Battery charge low Charge or replace batt ...

Starter Description and operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Reservoir Tank Repair procedures
Removal and Installation 1. Loosen the drain plug and drain the coolant and remove the radiator cap to speed draining. (Refer to Cooling System - "Coolant") 2. Disconnect the over flow hose (A) and cooling hose (B). ...

Hyundai Kona (OS) 2018-2024 Owners Manual: Distributing the sealant
9. Immediately drive approximately 7~10 km (4~6 miles or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 80 km/h (50 mph). If possible, do not fall below a speed of 20 km/h (12 mph). While driving, if you experience any unusual vibration, ride disturbance or ...