Hyundai Kona: Ignition System / Spark Plug Specifications

Specification
Item
Specification
Type
SILZKR8E8G
Gap
0.7 - 0.8 mm
(0.0275 - 0.0314 in.)

Ignition Coil Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the engine cover. 3. ...

Spark Plug Description and operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/ai ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Hazard Lamp Switch Repair procedures
Inspection 1. Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch. Removal    ...

Hyundai Kona (OS) 2018-2021 Service Manual: Alternator Description and operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal.In addition, the charging voltage of this alternator is regulated by the battery voltage detection system. The a ...

© 2018-2021 www.hkona.com