Hyundai Kona: Cruise Control System / Schematic diagrams

System Block Diagram

Component Parts and Function Outline
Component part
Function
Vehicle-speed sensor, ESP/ABS Control Module
Converts vehicle speed to pulse.
ECM
Receives signals from sensor and control switches.
Cruise control indicator
Illuminate when CRUISE main switch is ON (Built into cluster)
Cruise Control switches
CRUISE switch
Switch for automatic speed control power supply.
RES+ switch
Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch)
SET- switch
Cancel switches
Cancel switch
Sends cancel signals to ECM.
Brake-pedal switch
Transaxle range switch (A/T)
ETC motor
Regulates the throttle valve to the set opening by ECM.

* ETC Motor : Electronic Throttle Control Motor
Description and operation
Cruise Control The cruise control system is engaged by the cruise "ON/OFF" main switch located on the right-hand side of steering wheel column. The system has the capabili ...

Troubleshooting
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set veh ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Emergency Stop Signal (ESS)
The Emergency Stop Signal system alerts the driver behind by blinking the stop lights, while sharply and severely braking. The system is activated when: The vehicle suddenly stops. (The deceleration power exceeds 7 m/s2, and the driving speed exceeds 55 km/h (34 mph).) The ABS is activated and ...

Hyundai Kona (OS) 2018-2026 Service Manual: Description and operation
Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the sea ...

В© 2018-2026 www.hkona.com