Hyundai Kona: Ignition System / Ignition Coil Specifications
Hyundai Kona (OS) 2018-2026 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Specifications
| Specification |
|
Item |
Specification |
|
Primary Coil Resistance (Ω) |
0.56 ± 10% [20°C (68°F)] |
|
Pin |
4 |
Troubleshooting
Troubleshooting
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock sw ...
Ignition Coil Description and operation
Description
An ignition coil is an induction coil in an engine's ignition system which transforms
the battery's low voltage to the high voltage needed to create an electric ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Specifications
Specification
Item
Specification
Power source
3V
Operating temperature
-10°C ~ to 60°C (14°F to 140°F)
RF Modulation
FSK
...
Hyundai Kona (OS) 2018-2026 Service Manual: Alternator Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Disconnect the air compressor connector (A) and the alternator connector
(B), and remove the cable (C) from alternator "B" terminal.
...
© 2018-2026 www.hkona.com
