Hyundai Kona: ISG (Idle Stop & Go) System / Brake Booster Vacuum Pressure Sensor Schematic diagrams

Hyundai Kona (OS) 2018-2020 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Brake Booster Vacuum Pressure Sensor Schematic diagrams

Circuit Diagram

Brake Booster Vacuum Pressure Sensor Description and operation
Description In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure s ...

Brake Booster Vacuum Pressure Sensor Repair procedures
Inspection 1. Check installation status of BBVPS and Vacuum hose or damage of vacuum hose. 2. Connect GDS to DLC (Data Link Cable). ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Troubleshooting
Troubleshooting Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as required Ignition coil ...

Hyundai Kona (OS) 2018-2020 Owners Manual: For best battery service
Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spilled electrolyte from the battery immediately with a solution of water and baking soda. If the vehicle i ...

© 2018-2020 www.hkona.com