Hyundai Kona: Brake System / Brake Line Components and components location
| Components |
Master Cylinder Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the air cleaner.
(Refer to Engine Mech ...
Brake Line Repair procedures
Removal
Brake Tube [VDC Control unit ↔ Master cylinder]
1.
Turn ignition switch OFF and disconnect the battery negative (-) cable.
2.
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Rear Door Outside Handle Repair procedures
Replacement
1.
Remove the plug hole.
2.
After loosening the mounting bolt, remove the rear door outside handle
cover (A).
Tightening torque :
7.8 - 10.8 N.m (0.8 - 1.1 kgf.m, 5.8 - 8.0 lb-ft)
...
Hyundai Kona (OS) 2018-2026 Service Manual: Temperature Control Actuator Description and operation
Description
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the temperature
door by operating the temperature switch. Then the tempe ...
