Hyundai Kona: Timing System / Crankshaft Damper Pulley Components and components location

Hyundai Kona (OS) 2018-2026 Service Manual / Engine Mechanical System / Timing System / Crankshaft Damper Pulley Components and components location

Components

1. Crankshaft damper pulley

Drive Belt Tensioner Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the alternator. ...

Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the engineroom under ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Ignition Coil Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the connection hose (9) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the recomended t ...

В© 2018-2026 www.hkona.com