Removal and Installation |
1. |
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
|
2. |
Remove the alternator.
(Refer to Engine Electrical System - "Alternator")
|
3. |
Remove the alternator bracket (belt tunsioner) (C).
|
4. |
Install in the reverse order of removal.
|
Hyundai Kona (OS) 2018-2023 Service Manual: Brake Switch Repair procedures
Inspection
1.
Inspect a removed stop lamp switch along the below procedures.
(1)
Confirm a normal connection with terminal part
–
A confirmation can be made to see if the connector h ...
Hyundai Kona (OS) 2018-2023 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification : Refer to "Specification"
Remo ...