Hyundai Kona: ISG (Idle Stop & Go) System / Door Switch Repair procedures

Hyundai Kona (OS) 2018-2020 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Door Switch Repair procedures

Inspection

1.	Remove the door switch and check for continuity between the terminals.

Removal

1.	Remove the door switch (A) after loosening the bolt.

Installation

1.	Install in reverse of removal.

Door Switch Description and operation

Description Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG ...

Seat Belt Switch Description and operation

Description Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Front Wheel Transfer Assembly Repair procedures
Removal 1. Remove the following items. (Refer to Suspension System - "Sub Frame") 2. Remove the propeller shaft (A). Tightening torque : 49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.1 - 47. ...

Hyundai Kona (OS) 2018-2020 Service Manual: Components and components location
Component Location 1. DDM (Driver Door Module) 2. ADM (Assist Door Module) 3. SJB (Smart Junction Block) 4. Door lock knob 5. Trunk lid actuator 6. Door latch module 7. Door lock/unlock switch 8. RLDM (Rear Left Door Module) ...