Hyundai Kona: ISG (Idle Stop & Go) System / Door Switch Description and operation

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follows. If the seat belt or door is opened, the engine must not be started or stopped by the ISG function for safety reasons.

Brake Switch Repair procedures

Inspection 1. Inspect a removed stop lamp switch along the below procedures. (1) Confirm a normal connection with terminal part ...

Door Switch Repair procedures

Inspection 1. Remove the door switch and check for continuity between the terminals. Removal 1. Remove the doo ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Rear Seat Belt Buckle Components and components location
Component Location 1. Rear seat belt buckle [RH] 2. Rear seat belt buckle [LH] 3. Rear center seat belt buckle ...

Hyundai Kona (OS) 2018-2026 Service Manual: Exhaust Gas Temperature Sensor (EGTS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the connector of exhaust gas temperature sensors #1/#2. 3. Measure resistance between sensor signal terminal and ground terminal. 4. ...