Hyundai Kona: Electronic Stability Control (ESC) / ESC OFF usage
When Driving
The ESC OFF mode should only be used briefly to help free the vehicle if stuck in snow or mud, by temporarily stopping operation of the ESC, to maintain wheel torque.
To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface.
NOTICE
To prevent damage to the transmission:
- Do not allow wheel(s) of one axle to spin excessively while the ESC, ABS, and parking brake warning lights are displayed. The repairs would not be covered by the vehicle warranty. Reduce engine power and do not spin the wheel(s) excessively while these lights are displayed.
- When operating the vehicle on a dynamometer, make sure the ESC is turned off (ESC OFF light illuminated).
Information
Turning the ESC off does not affect ABS or standard brake system operation.
Indicator lights
When the ignition switch is in the ON position, the ESC indicator light illuminates,
then goes off if the ESC system is operating normally.
The ESC indicator light blinks whenever the ESC is operati ...
Vehicle Stability Management
The Vehicle Stability Management (VSM) is a function of the Electronic Stability
Control (ESC) system. It helps ensure the vehicle stays stable when accelerating
or braking suddenly on wet, slippery ...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Electric WGT Control Actuator Specifications
Specification
[EWGA Position Sensor]
Position
Output Voltage [V]
Operating Angle [°]
Range of Rod [mm], reference
Mechanical Close end stop Position (MCP)
4.8
0
0
...
Hyundai Kona (OS) 2018-2025 Owners Manual: Downhill Brake Control (DBC) Indicator Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
When you activate the DBC system by pressing the DBC button.
This warning light blinks:
When the DBC is operating. ...
