Hyundai Kona: Manual heating and air conditioning / Fan speed control (2)
The fan speed can be set as desired by pushing the fan speed control button.
More air is delivered with higher fan speeds.
Pressing the OFF button turns off the fan.
NOTICE
Operating the fan when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan when the engine is running.
Air intake control (9)
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the recirculat ...
Air conditioning (4)
Push the A/C button to turn the air conditioning system on (indicator light will
illuminate).
Push the button again to turn the air conditioning system off. ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Front Wheel Speed Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF and then disconnect the negative (-) battery
cable.
2.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
3.
Remove t ...
Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to "Release Residual
Pressure in Fuel Line" in this group).
•
...
