The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically.
1.Start the engine.
2.Set the mode to the desired position. For improving the effectiveness of heating and cooling, select:
- Heating:
- Cooling:
3.Set the temperature control to the desired position.
4.Set the air intake control to the outside (fresh) air position.
5.Set the fan speed control to the desired speed.
6.If air conditioning is desired, turn the air conditioning system on.
7.Press the AUTO button to convert to full automatic control of the system.
Automatic heating and air conditioning
Mode selectionHyundai Kona (OS) 2018-2026 Owners Manual: Fuel filler door
Opening the fuel filler door
The fuel filler door must be opened from inside the vehicle by pulling up on
the fuel-filler door opener.
1. Turn the engine off.
2. To open the fuel filler door, pull the fuel filler door opener up.
3. Pull the fuel filler door (1) out to fully open.
4. To remove the ...
Hyundai Kona (OS) 2018-2026 Service Manual: Front Door Latch Repair procedures
Replacement
1.
Remove the front door outside handle.
(Refer to Front Door - "Front Door Outside Handle")
2.
Loosen the front door latch mounting screws.
Tightening torque :
6.9 - 10 ...