Hyundai Kona: Manual heating and air conditioning / Temperature control (1)
The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left.
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Defrost-Level (A, D)
Most of the air flow is directed to the windshield.
Face-Level (B, D)
Air flow ...
Air intake control (9)
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the recirculat ...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: Evaporator Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminal "+" and "-" of t ...
Hyundai Kona (OS) 2018-2021 Service Manual: Fuel Line Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel
Line")
2.
Turn the ignition switch OFF, and then remove battery (-) terminal.
...