Hyundai Kona: Front Door / Front Door Belt Outside Weatherstrip Repair procedures

Hyundai Kona (OS) 2018-2020 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Outside Weatherstrip Repair procedures

Replacement
1.
Pull down the front door window glass to the lowest level by pressing the power window glass switch.
2.
Using a screwdriver or remover, remove the front door belt outside weatherstrip (A).

3.
To install, reverse removal procedure.
  
Replace any damaged clips (or pin-type retainers).
Front Door Latch Repair procedures
Replacement 1. Remove the front door outside handle. (Refer to Front Door - "Front Door Outside Handle") 2. Loosen the fr ...

Front Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: TPMS Receiver Description and operation
Description TPMS Receiver : BCM(body control module) integrated management 1. Mode (1) Virgin State • The receiver as a sole part is shipped in this state. Replacem ...

Hyundai Kona (OS) 2018-2020 Service Manual: Passenger Airbag (PAB) Module Description and operation
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.    • ...

© 2018-2020 www.hkona.com