Hyundai Kona: Front Door / Front Door Belt Inside Weatherstrip Repair procedures

Hyundai Kona (OS) 2018-2025 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip Repair procedures

Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).

3.
To install, reverse removal procedure.
  
•
When installing, install it by first contacting the inside part (basis point of assembly) of arrow to door frame.
•
Replace any damaged clips (or pin-type retainers).
Front Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down the front door window glass to the lowest level by pressing the power window glass switch. 2. Using a screwdr ...

Front Door Side Weatherstrip Repair procedures
Replacement [Front door side weatherstrip] 1. Loosen the front door checker (B) mounting bolt. Tightening torque : ...

Other information:

Hyundai Kona (OS) 2018-2025 Owners Manual: Detecting pedestrians
The sensor may be limited when: The pedestrian is not fully detected by the camera recognition system, for example, if the pedestrian is leaning over or is not fully walking upright The pedestrian is moving very quickly or appears abruptly in the camera detection area The pedestrian is weari ...

Hyundai Kona (OS) 2018-2025 Owners Manual: Air bag collision sensors
WARNING To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death: Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the s ...

© 2018-2025 www.hkona.com