| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
| 2. |
Disconnect the fuel sender connector (B).
|
| 3. |
Press the fixing hook (A) with a driver and then remove fuel sender
(B) in the arrow direction.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Fuel Pump Motor Repair procedures
Fuel Pressure Regulator Repair proceduresHyundai Kona (OS) 2018-2026 Owners Manual: Battery replacement
If the Smart Key is not working properly, try replacing the battery with a new
one.
Battery Type: CR2032
To replace the battery:
1. Remove the mechanical key. 2. Use a slim tool to pry open the rear cover
of the smart key. 3. Remove the old battery and insert the new battery. Make sure
the batte ...
Hyundai Kona (OS) 2018-2026 Service Manual: Relay Box (Engine Compartment) Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay block.
Power Relay (Type A)
Check for continuity between the terminals.
...