Hyundai Kona: Dual Clutch Transmission Control System / Gear Actuator Assembly Specifications

Specification
Item
Condition
Specification
Resistance (line to line)
Shift motor 1/2
126.4 mΩ ± 10%
Select solenoid 1/2
0.7 Ω ± 10 %
Max. current
Shift motor 1/2
45 A
Select solenoid 1/2
20 A
Select solenoid sensor output
Push
4.0  ± 0.15 V
Pull
1.0 ± 0.15 V
Operation condition (°C)°F
-40 to 257 °F (-40 to 125 °C )
Sensor supply voltage
8.75 V ± 10 %

Gear Actuator Assembly Components and components location
Components 1. Gear actuator assembly 2. Shift motor (Even) 3. Shift motor (Odd) 4. Select solenoid (Even) 5. Select solenoid (Odd) ...

Gear Actuator Assembly Description and operation
Description • Components location : DCT (Dual Clutch Transmission) • Function The gear actuator comprises the shift ...

Other information:

Hyundai Kona (OS) 2018-2023 Service Manual: Exhaust Gas Temperature Sensor (EGTS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the connector of exhaust gas temperature sensors #1/#2. 3. Measure resistance between sensor signal terminal and ground terminal. 4. ...

Hyundai Kona (OS) 2018-2023 Owners Manual: Jump starting procedure
1. Position the vehicles close enough that the jumper cables will reach, but do not allow the vehicles to touch. 2. Avoid fans or any moving parts in the engine compartment at all times, even when the vehicles are turned off. 3. Turn off all electrical devices such as radios, lights, air condition ...

© 2018-2023 www.hkona.com