Hyundai Kona: Hood / Hood Assembly Components and components location

Hyundai Kona (OS) 2018-2021 Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Components and components location

Component Location

1. Hood assembly

Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt. ...

Hood Assembly Repair procedures
Replacement    • Be careful not to damage the hood and body. ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Heater & A/C Control Unit (Manual) Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Crash Pad - "Crash Pad Lower Panel") 3. Remove the cr ...

Hyundai Kona (OS) 2018-2021 Service Manual: Heated Oxygen Sensor (HO2S) Description and operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance with the air/fuel ratio. The sensor must be hot in order to operate no ...

© 2018-2021 www.hkona.com