Adjustment |
1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up and down or from side to side and tighten the bolt.
|
2. |
Adjust the hood height by moving the hood overslam bumpers (C) up and
down.
|
3. |
After loosening the hood latch (D) mounting bolts, adjust the latch
by moving it up and down or from side to side.
|
Hyundai Kona (OS) 2018-2024 Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the engineroom under cover.
(Refer to Engine and Transmission Assembly - "Engine Room Under Cover")
...
Hyundai Kona (OS) 2018-2024 Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS.
(Refer to "Removal")
3.
After immersing the thermistor of the sensor into engine coolant, measure
resistance between the EC ...