Hyundai Kona: Dual Clutch Transmission Control System / Inhibitor Switch Troubleshooting
| Fault Diagnosis |
| Fault Diagnosis for Symptom |
|
Major Symptom |
Expected Cause |
Items to Check and Measures |
|
Shift lever not operating Gear not marked on cluster Shock occurs while shifting lever Warning lamp ON Engine OFF while vehicle is parked |
Inhibitor switch circuit abnormal Inhibitor switch function abnomal |
Check the inspection FLOW and replace the inhibitor switch |
|
Inhibitor switch "N" setting faulty |
Adjust "N" setting using "N" setting jig (Refer to Dual Clutch Transmission
Control System - "Inhibitor Switch") |
|
|
Shift cable separation faulty |
Adjust shift cable separation (Refer to Dual Clutch Transmission Control
System - "Inhibitor Switch") |
|
|
Poor ground condition on reversing light circuit |
Check the ground condition on reversing light and retighten it |
|
|
Inhibitor switch vehicle side circuit abnormal |
Check the connection of junction box power terminal, fuse (TCU) terminal
and replace the junction box or adjust the gap |
|
|
Check inside the inhibitor switch connector for foreign substance and whether
terminal is bent |
||
|
Poor ground condition on inhibitor switch wire |
Check the ground condition of wire and retighten it |
|
|
Poor inhibitor unit (disconnection/short-circuit) |
Replace inhibitor switch (Refer to Inhibitor Switch Inspection) |
Inhibitor Switch Schematic diagrams
Circuit Diagram
...
Inhibitor Switch Repair procedures
Inspection
Inspection Flow
Items to check
1.
Inspect DTC code.
2.
Inspect whether N setting matches.
–
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: CVVT (Continuous Variable Valve Timing) System Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valves in accordance with the ECM control signal
calculated by the engine speed and load.
By controlling CVVT, the valve over-lap or under-lap occurs, w ...
Hyundai Kona (OS) 2018-2026 Service Manual: Power Door Mirror Actuator Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant inner cover (A).
3.
Disconnect the power door mirror connector from the harnes ...
