Hyundai Kona: Engine Control System / Knock Sensor (KS) Schematic diagrams

Circuit Diagram

Harness Connector

Knock Sensor (KS) Specifications
Specification Item Specification Resistance (MΩ) 4.87 ...

Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Rear combination lamp bulb replacement
(1) Stop/Tail lamp (2) Tail lamp(Type A), Stop/Tail lamp (Type B) (3) Turn signal lamp (4) Rear fog lamp (LHD : Left side, RHD : Right side) (5) Backup lamp (LHD : Right side, RHD : Left side) Stop/Tail lamp 1. Turn off the engine. 2. Open the tailgate. 3. Loosen the lamp assembly retaining scr ...

Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
Adjustment Inspect Glass Alignment 1. Inspect the step height between the roof panel (A) and the glass weatherstrip (B) and then adjust it if necessary. Alignment adjustment Standard value [mm(in.)] ...

© 2018-2026 www.hkona.com