Hyundai Kona: Engine Control System / Knock Sensor (KS) Specifications

Specification
Item
Specification
Resistance (MΩ)
4.87

Knock Sensor (KS) Description and operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses ...

Knock Sensor (KS) Schematic diagrams
Circuit Diagram Harness Connector ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Rear Door Outside Handle Repair procedures
Replacement 1. Remove the plug hole. 2. After loosening the mounting bolt, remove the rear door outside handle cover (A). Tightening torque : 7.8 - 10.8 N.m (0.8 - 1.1 kgf.m, 5.8 - 8.0 lb-ft) ...

Hyundai Kona (OS) 2018-2020 Service Manual: Door Mirror Lamp Repair procedures
Remove 1. Disconnect (-) battery terminal. 2. Remove door mirror assembly. (Refer to Body - "Mirror") 3. Remove mirror (A) to the direction as shown in the pictur ...

© 2018-2020 www.hkona.com