Hyundai Kona: Lubrication System / Oil Pan Repair procedures

Hyundai Kona (OS) 2018-2026 Service Manual / Engine Mechanical System / Lubrication System / Oil Pan Repair procedures

Removal

1.	Remove the under cover. (Refer to Engine and Transaxle Assembly - "Engine Under Cover")

2.	Drain engine oil. (Refer to Lubricatipon System - "Engine Oil")

Using the SST (09215-3C000) (A) and remove the oil pan.

•	Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of

Oil Pan Components and components location

Components 1. Gasket 2. Oil screen 3. Oil pan 4. Drain plug gasket 5. Drain plug ...

Oil Level Gauge & Pipe Repair procedures

Removal and Installation 1. Remove the oil lever gauge and pipe (A). Tightening torque : 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Distributing the sealant
9. Immediately drive approximately 7~10 km (4~6 miles or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 80 km/h (50 mph). If possible, do not fall below a speed of 20 km/h (12 mph). While driving, if you experience any unusual vibration, ride disturbance or ...

Hyundai Kona (OS) 2018-2026 Service Manual: Alternator Specifications
Specifications Item Specification Nominal output 13.5V 130A Speed in use 1,000 - 18,000 rpm Regulator Type IC Regulator built in type ECM Interface type reg ...