Hyundai Kona: System setting and activation / Prerequisite for activation

The FCA gets ready to be activated, when the FCA is selected on the LCD display, and when the following prerequisites are satisfied.

- The ESC (Electronic Stability Control) is on.
- Vehicle speed is over 10 km/h (6 mph). (The FCA is only activated within a certain speed range.)
- The system detects a pedestrian or a vehicle in front, which may collide with your vehicle. (The FCA may not be activated or may sound a warning alarm in accordance with the driving situation or vehicle condition.)

WARNING

System setting
• The driver can activate the FCA by placing the ignition switch to the ON position and by selecting: "User Settings Driver assistance Forward Collision-avoidance Assist (FCA)" The FCA deactivates, ...

FCA warning message and system control
The FCA produces warning messages and warning alarms in accordance with the collision risk levels, such as abrupt stopping of the vehicle in front, insufficient braking distance, or pedestrian detec ...

Other information:

Hyundai Kona (OS) 2018-2019 Service Manual: Camshaft Position Sensor (CMPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification : Refer to "Wave Form" Removal    ...

Hyundai Kona (OS) 2018-2019 Service Manual: Rain Sensor Repair procedures
Removal    • Do not damage or touch the silicone (coupling medium). • Be careful so that the silicon is not ...

© 2018-2019 www.hkona.com