Hyundai Kona: Body (Interior and Exterior) / Rear Bumper
- Components and components location
- Rear Bumper Cover Components and components location
- Rear Bumper Cover Repair procedures
- Rear Bumper beam Assembly Components and components location
- Rear Bumper beam Assembly Repair procedures
Radiator Grill Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
...
Components and components location
Components
1. Rear bumper side bracket [LH]
2. Rear bumper side bracket [RH]
3. Rear bumper cover
...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Front Lower Arm Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from the front hub.
Tightening torque :
107.9 - 12 ...
Hyundai Kona (OS) 2018-2025 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM. By
using this signal, the ECM calcul ...
