Hyundai Kona: Exterior lights / Rear fog lamp
Vehicle with front fog lamp
.png)
To turn on the rear fog lamp:
Position the light switch in the position lamp position, turn the light switch (1) to the front fog lamp position, and then turn the light switch (1) to the rear fog lamp position.
To turn the rear fog lamps off, do one of the following:
- Turn off the position light switch.
- Turn the light switch to the rear fog lamp position again.
- When the light switch is in the position lamp position, if you turn off the front fog lamp, the rear fog lamp will also turn off.
Vehicle without front fog lamp
.png)
To turn on the rear fog lamp:
Position the light switch in the headlamp position, and then turn the light switch (1) to the rear fog lamp position.
To turn the rear fog lamps off, do one of the following:
- Turn off the headlamp switch.
- Turn the light switch to the rear fog lamp position again.
Front fog lamp
Fog lamps are used to provide improved visibility when visibility is poor due
to fog, rain or snow, etc.
Use the switch next to the headlamp switch to turn the fog lamps ON and OFF.
1. Turn on the p ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the position lamp when the driver turns the engine
off and opens the driver-side door. ...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: In-car Sensor Description and operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside.
The signal decided by the resistance value which changes in accordance with
perceived inside ...
Hyundai Kona (OS) 2018-2021 Service Manual: Front Oil Seal Repair procedures
Removal and Installation
1.
Crankshaft damper pulley.
(Refer to Timing System - "Damper Pulley")
2.
Remove the front oil seal (A).
3.
Install the front oil seal.
...