Hyundai Kona: Repair procedures / Side Impact Sensor (SIS) Description and operation

Hyundai Kona (OS) 2018-2024 Service Manual / Restraint / Repair procedures / Side Impact Sensor (SIS) Description and operation

Description
Side Impact Sensors (SIS), each installed on the center part of the right and left front door modules and the right and left center pillars, detects side impact during collision.
The SRSCM uses the signals from SIS during side collision to determine whether and when to deploy the side air bag.
Side Impact Sensor (SIS) Components and components location
Components 1. Front Pressure Side Impact Sensor (P-SIS) 2. Front Gravity Side Impact Sensor (G-SIS) ...

Side Impact Sensor (SIS) Repair procedures
Removal Pressure Side Impact Sensor    • Removal of the airbag must be performed acc ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: GPF (Gasoline Particulate Filter) Repair procedures
GPF Regeneration This procedures is to forcibly regenerate the GPF with scan tool when the GPF doesn't have been regenerated during driving. For example, if the vehicle has repeated "Low speed driving" or "Short distance driving", the GPF regeneration ...

Hyundai Kona (OS) 2018-2024 Owners Manual: 4 Wheel Drive (4WD) LOCK Indicator Light
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When you select 4WD Lock mode by pressing the 4WD LOCK button. - The 4WD LOCK mode is to increase the drive power ...

© 2018-2024 www.hkona.com