Hyundai Kona: Engine Control / Fuel System / Special service tools

Special Service Tools
Tool (Number and Name)
Illustration
Application
Fuel Pressure Gauge
(09353-24100)

Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)

Connection between the high pressure fuel pump and the fuel feed line
Heated Oxygen Sensor Socket Wrench
(09392-1Y100)

Removal and installation of the heated oxygen sensor
Torque Wrench Socket
(09314-3Q100) or
(09314-27130) (19mm)

Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool
(09353-2B000)

Installation of the injector combustion seal
Fuel Pump Locking Ring Remover
(09310-B8100)

Removal and installation of the fuel pump

Specifications
Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 50 lit. (13.2 U.S.gal., 52.8 U.S.qt., 44 ...

Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Re ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Input shaft speed sensor 2 Repair procedures
Removal 1. Remove the cleaner assembly and air duct. (Refer to Engine Mechainical System - "Air Cleaner") 2. Disconnect the Input shaft speed sensor connector (A). 3. Remove the battery and ba ...

Hyundai Kona (OS) 2018-2020 Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer to Body ...

© 2018-2020 www.hkona.com