Hyundai Kona: ISG (Idle Stop & Go) System / Starter Specifications
| Specification |
|
Item |
Specification |
|
|
Rated voltage |
12V, 1.3 kw |
|
|
The number of pinion teeth |
11 |
|
|
Performance [No-load, 11.5V] |
Ampere |
Max. 95A |
|
Speed |
Min. 3,400 rpm |
|
Starter Description and operation
Description
The starting system consists of the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
conne ...
Starter Components and components location
Component
1. Front
housing
2. Stop ring
3. Stopper
4. Overrun clutch assembly
5. Internal gear assembly
6. Planetary shaft assembly
7. Planetary gear ...
Other information:
Hyundai Kona (OS) 2018-2026 Owners Manual: Rear window wiper and washer switch
The rear window wiper and washer switch is located at the end of the wiper and
washer switch lever.
Turn the switch to the desired position to operate the rear wiper and washer.
2 / HI – High wiper speed 1 / LO – Low wiper speed O / OFF – Off
Push the lever away from you to spray rear washer ...
Hyundai Kona (OS) 2018-2026 Owners Manual: Securing a Child Restraint System with a lap/shoulder belt
When not using the ISOFIX system, all Child Restraint Systems must be secured
to a rear seat with the lap part of a lap/shoulder belt.
Installing a Child Restraint System with a lap/shoulder belt
To install a Child Restraint System on the rear seats, do the following:
1. Place the Child Restraint ...
