Hyundai Kona: Cruise Control operation / To decrease Cruise Control speed

Hyundai Kona (OS) 2018-2026 Owners Manual / Driving your vehicle / Cruise control / Cruise Control operation / To decrease Cruise Control speed

Push the toggle switch down (SET-) and hold it.Your vehicle will gradually slow down. Release the toggle switch at the speed you want to maintain.
Push the toggle switch down (SET-) and release it immediately. The cruising speed will decrease 2.0 km/h (1.2 mph) each time the toggle switch is operated in this manner.
Lightly tap the brake pedal. When the vehicle attains the desired speed, push the toggle switch down (SET-).

To increase Cruise Control speed

Push the toggle switch up (RES+) and hold it, while monitoring the SET speed on the instrument cluster. Release the toggle switch when the desired speed is shown and the vehicle will accelerate ...

To temporarily accelerate with the Cruise Control ON

Depress the accelerator pedal.When you take your foot off the accelerator, the vehicle will return to the previously set speed. If you push the toggle switch down (SET-) at the increased speed, the C ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Console Armrest Repair procedures
Replacement • Put on gloves to prevent hand injuries. • Wh ...

Hyundai Kona (OS) 2018-2026 Service Manual: Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulato ...