Hyundai Kona: Cruise Control operation / To temporarily accelerate with the Cruise Control ON
Depress the accelerator pedal.When you take your foot off the accelerator, the vehicle will return to the previously set speed.
If you push the toggle switch down (SET-) at the increased speed, the Cruise Control will maintain the increased speed.
To decrease Cruise Control speed
Push the toggle switch down (SET-) and hold it.Your vehicle will gradually
slow down. Release the toggle switch at the speed you want to maintain.
Push the toggle switch down (SET-) and release ...
Cruise Control will be canceled when:
Depressing the brake pedal.
Depressing the clutch pedal. (for manual transmission vehicle)
Pressing the O (Cancel) button located on the steering wheel.
Pressing the (CRUISE) button.
Both the ...
Other information:
Hyundai Kona (OS) 2018-2021 Owners Manual: Downhill Brake Control (DBC) Indicator Light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
When you activate the DBC system by pressing the DBC button.
This warning light blinks:
When the DBC is operating. ...
Hyundai Kona (OS) 2018-2021 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM. By
using this signal, the ECM calcul ...