Hyundai Kona: Cruise Control operation / To increase Cruise Control speed
.png)
- Push the toggle switch up (RES+) and hold it, while monitoring the SET
speed on the instrument cluster.
Release the toggle switch when the desired speed is shown and the vehicle will accelerate to that speed. - Push the toggle switch up (RES+) and release it immediately. The cruising speed will increase 2.0 km/h (1.2 mph) each time the toggle switch is operated in this manner.
- Depress the accelerator pedal. When the vehicle attains the desired speed, push the toggle switch down (SET-).
To set Cruise Control speed
1. Press the (CRUISE) button on the
steering wheel to turn the system on. The
(CRUISE) indicator will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
Inform ...
To decrease Cruise Control speed
Push the toggle switch down (SET-) and hold it.Your vehicle will gradually
slow down. Release the toggle switch at the speed you want to maintain.
Push the toggle switch down (SET-) and release ...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Fuel Pump Control Module (FPCM) Schematic diagrams
Circuit Diagram
Terminal Illustration
Terminal Function
Pin No
Description
Connected to
1
Fuel sender ground (-)
Fuel Pump
2
Fuel pressure sensor ...
Hyundai Kona (OS) 2018-2025 Service Manual: A/C Pressure Transducer Description and operation
Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure
line into voltage value after measuring it. By converted voltage value,
engine ECU controls the cooling fan by operating it high speed or low speed.
Engine ECU stops the opera ...
