Hyundai Kona: Engine Control System / Ambient Temperature Sensor (ATS) Description and operation

Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger. The electrical resistance of the thermistor decreases as the temperature increases, and increases as the temperature decreases This sensor has a Negative Temperature Coefficient (NTC) and its resistance is in inverse proportion to the temperature.

Intake Air Temperature Sensor (IATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between th ...

Ambient Temperature Sensor (ATS) Specifications

Specification Temperature [°C (°F)] Resistance (kΩ)  -40 (-40) 841.2 - 1019.3  -20 (-4) ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: ESCL(Electronic Steering Column Lock) Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering colu ...

Hyundai Kona (OS) 2018-2026 Service Manual: Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Correct Excessive turning resistance of lower arm ball joint Replace Lo ...