Hyundai Kona: Engine Control System / Ambient Temperature Sensor (ATS) Specifications
| Specification |
|
Temperature [°C (°F)] |
Resistance (kΩ) |
| -40
(-40) |
841.2 - 1019.3 |
| -20
(-4) |
263.8 - 306.5 |
|
0 (32) |
92.4 - 102.8 |
|
10 (50) |
57.0 - 62.2 |
|
20 (68) |
36.2 - 38.8 |
|
40 (104) |
15.3 - 16.7 |
|
50 (122) |
10.3 - 11.4 |
|
60 (140) |
7.1 - 8.0 |
|
80 (176) |
3.5 - 4.0 |
Ambient Temperature Sensor (ATS) Description and operation
Description
Ambient Temperature Sensor (ATS) is installed on the front-end module and senses
the ambient temperature. ECM receives not only the intake air temperatue but
also the ...
Ambient Temperature Sensor (ATS) Schematic diagrams
Circuit Diagram
Harness Connector
...
Other information:
Hyundai Kona (OS) 2018-2021 Owners Manual: Distributing the sealant
9. Immediately drive approximately 7~10 km (4~6 miles or, about 10min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 80 km/h (50 mph). If possible, do not fall below a speed
of 20 km/h (12 mph). While driving, if you experience any unusual vibration, ride
disturbance or ...
Hyundai Kona (OS) 2018-2021 Owners Manual: Resetting the sunroof
The sunroof may need to be reset if the following conditions occur:
- The battery is discharged or disconnected or the sunroof fuse has been replaced
or disconnected - The sunroof control lever is not operating correctly
To reset the sunroof, perform the following steps:
1. Place the ignition switc ...