Hyundai Kona: Engine Control System / Ambient Temperature Sensor (ATS) Schematic diagrams

Harness Connector

Ambient Temperature Sensor (ATS) Specifications

Specification Temperature [°C (°F)] Resistance (kΩ)  -40 (-40) 841.2 - 1019.3  -20 (-4) ...

Ambient Temperature Sensor (ATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ATS connector. 3. Measure resistance between the ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Brake Booster Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses fully the first time but gradually becomes higher when d ...

Hyundai Kona (OS) 2018-2020 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the cond ...