Hyundai Kona: Air Conditioning System / Auto Defogging Sensor Description and operation

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Repair procedures

Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. ...

Auto Defogging Sensor Repair procedures

Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ...

Other information:

Hyundai Kona (OS) 2018-2025 Owners Manual: Malfunction Indicator Lamp (MIL)
This warning light illuminates: When you set the ignition switch or the Engine Start/Stop button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the emission control system. In this case, we recommend that you have the vehi ...

Hyundai Kona (OS) 2018-2025 Service Manual: Front Door Inside Handle Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. After loosening the mounting screws, remove the front door inside handle (A). 3. To install ...