Hyundai Kona: Heating, Ventilation and Air Conditioning / Air Conditioning System
- General safety information and caution
- Description and operation
- Repair procedures
- Components and components location
- Compressor oil Repair procedures
- Refrigerant Line Components and components location
- Refrigerant Line Repair procedures
- Compressor Description and operation
- Compressor Components and components location
- Compressor Repair procedures
- Condenser Components and components location
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- A/C Pressure Transducer Description and operation
- A/C Pressure Transducer Repair procedures
- Evaporator Temperature Sensor Description and operation
- Evaporator Temperature Sensor Repair procedures
- In-car Sensor Description and operation
- In-car Sensor Repair procedures
- Photo Sensor Description and operation
- Photo Sensor Repair procedures
- Ambient Temperature Sensor Description and operation
- Ambient Temperature Sensor Repair procedures
- Auto Defogging Sensor Description and operation
- Auto Defogging Sensor Repair procedures
- Cluster Ionizer Components and components location
- Cluster Ionizer Description and operation
- Cluster Ionizer Repair procedures
Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt r ...
General safety information and caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the skin
of your hand could result in localized ...
Other information:
Hyundai Kona (OS) 2018-2026 Owners Manual: Outside rearview mirror
Be sure to adjust mirror angles before driving.
Your vehicle is equipped with both left-hand and right-hand outside rearview
mirrors.
The mirror can be adjusted remotely with the remote switch.
The mirror heads can be folded to prevent damage during an automatic car wash
or when passing through a ...
Hyundai Kona (OS) 2018-2026 Owners Manual: Shift-lock release
If the shift lever cannot be moved from the P (Park) position into R (Reverse)
position with the brake pedal depressed, continue depressing the brake, and then
do the following:
1. Place the ignition switch in the LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap (1) cove ...
