Hyundai Kona: Air Conditioning System / Evaporator Temperature Sensor Description and operation

The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC). Electrical resistivity of NTC will increase with decreasing temperature and decrease with increasing temperature.

A/C Pressure Transducer Repair procedures

Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal "1" and "2". ...

Evaporator Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Headlamp, Low beam assist – Static, position lamp, turn signal lamp and daytime running light bulb replacement
Type A (1) Headlamp (High) (2) Headlamp (Low) (3) Daytime running light (if equipped) / Position lamp (4) Turn signal lamp (5) Front fog lamp (if equipped) WARNING Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that will produce flying pieces of glass that could cause i ...

Hyundai Kona (OS) 2018-2026 Owners Manual: 4 Wheel Drive (4WD) LOCK Indicator Light
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When you select 4WD Lock mode by pressing the 4WD LOCK button. - The 4WD LOCK mode is to increase the drive power ...