Hyundai Kona: Air Conditioning System / In-car Sensor Description and operation

The In-car air temperature sensor is built in the heater & A/C control unit.

The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates in-car temperature to intended value.

Evaporator Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. ...

In-car Sensor Repair procedures

Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
Inspection ABS System Bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid. 1. Remove the reservoir cap and fill the brake reservoir tank with brake ...

Hyundai Kona (OS) 2018-2026 Owners Manual: System malfunction
Check Driver Attention Warning (DAW) system When the "Check Driver Attention Warning (DAW) system" warning message appears, the system is not working properly. In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer. WARNING The Driver Attention Warning (D ...