Hyundai Kona: Engine Control System / Boost Pressure Sensor (BPS) Specifications
Hyundai Kona (OS) 2018-2020 Service Manual / Engine Control / Fuel System / Engine Control System / Boost Pressure Sensor (BPS) Specifications
| Specification |
|
Pressure [kPa (kg/cm² / psi)] |
Resistance (kΩ) |
|
32.5 (0.33, 4.71) |
0.5 |
|
284 (2.90, 41.19) |
4.5 |
Boost Pressure Sensor (BPS) Description and operation
Description
The Boost Pressure Sensor (BPS) is installed on the intercooler assembly and
measures the pressure of the compressed air in turbocharger.
...
Boost Pressure Sensor (BPS) Schematic diagrams
Circuit Diagram
Harness Connector
...
Other information:
Hyundai Kona (OS) 2018-2020 Service Manual: Water pump Troubleshooting
Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
Visually check
•
...
Hyundai Kona (OS) 2018-2020 Owners Manual: Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control switch located on the overhead console.
The sunroof can be opened, closed, or tilted when the ignition switch is in the
ON position.
The sunroof can be operated for approximately 30 seconds aft ...
© 2018-2020 www.hkona.com