Hyundai Kona: Timing System / Drive Belt Tensioner Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the alternator.
(Refer to Engine Electrical System - "Alternator")
3.
Remove the alternator bracket (belt tunsioner) (C).
Tightening torque
[Part No : 11403-08407B]
24.5 - 26.9 N.m (2.48 - 2.74 kgf.m, 18.1 - 19.8 Ib-ft)
[Part No : 11405-08406K]
26.5 - 32.4 N.m (2.7 - 3.3 kgf.m, 19.5 - 23.9 Ib-ft)

4.
Install in the reverse order of removal.
Drive Belt Tensioner Components and components location
Components 1. Alternator bracket (Drive belt tensioner) ...

Crankshaft Damper Pulley Components and components location
Components 1. Crankshaft damper pulley ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Components and components location
Components Location 1. ECM (Engine Control Module) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Boost Pressure Sensor (BPS) 5. Engine Coolant Temperature Sensor (ECTS) 6. Throttle Position Sensor (TPS) 7. Cr ...

Hyundai Kona (OS) 2018-2026 Owners Manual: FCA warning message and system control
The FCA produces warning messages and warning alarms in accordance with the collision risk levels, such as abrupt stopping of the vehicle in front, insufficient braking distance, or pedestrian detection. Also, it controls the brakes in accordance with the collision risk levels. The driver can sel ...

В© 2018-2026 www.hkona.com