Hyundai Kona: Fuel Delivery System / Fuel Pump Control Module (FPCM) Schematic diagrams

Hyundai Kona (OS) 2018-2026 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Control Module (FPCM) Schematic diagrams

Circuit Diagram

Terminal Illustration

Terminal Function

Pin No	Description	Connected to
1	Fuel sender ground (-)	Fuel Pump
2	Fuel pressure sensor signal input	Fuel pressure sensor (FPS)
3	Fuel pressure sensor ground (-)	Fuel pressure sensor (FPS)
4	Ground (-)	Chassis Ground
5	CAN [Low]	ECM
6	Fuel sender signal (+)	Fuel Pump
7	-
8	Fuel pressure sensor power supply (+5V)	Fuel pressure sensor (FPS)
9	CAN [High]	ECM
10	Battery power (B+)	Fuel Pump Relay

Fuel Pump Control Module (FPCM) Description and operation

Description The fuel pump control module (FPCM) is installed on the right side of the fuel tank and controls the DC motor mounted inside the low pressure fuel pump.The module com ...

Fuel Pump Control Module (FPCM) Repair procedures

Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Mechanical key
If the remote key does not operate normally, you can lock or unlock the door by using the mechanical key. To unfold the key, press the release button then the key will unfold automatically. To fold the key, fold the key manually while pressing the release button. NOTICE Do not fold the key without ...

Hyundai Kona (OS) 2018-2026 Service Manual: Drive Belt Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension mounting bolts (A). 3. Loosen the adjusting bolt (B) clockuise in loose tension. 4. Rem ...