Hyundai Kona: Engine Control System / Injector Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.5 ± 0.075 [20°C (68°F)]

Injector Description and operation
Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fue ...

Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: High Pressure Fuel Pump Repair procedures
Removal    • In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure ...

Hyundai Kona (OS) 2018-2026 Service Manual: Mode Control Actuator Components and components location
Components Location 1. Mode control actuator ...

© 2018-2026 www.hkona.com