Hyundai Kona: Installing a Child Restraint System (CRS) / Suitability of each seating position for ISOFIX Child Restraint Systems according to ECE regulations
.png)
IUF = suitable for ISOFIX forward child restraints systems of universal category
approved for use in the mass group.
IL = suitable for particular ISOFIX child
restraints systems (CRS) given in the attached list. These ISOFIX CRS are those
of the "specific vehicle", "restricted" or "semi-universal" categories.
X = ISOFIX
position not suitable for ISOFIX child restraint system in this mass group and/or
this size class.
A - ISO/F3: Full-Height Forward-Facing toddler Child Restraint
System (height 720mm)
B - ISO/F2: Reduced-Height Forward-Facing toddler Child
Restraint System (height 650mm)
B1 - ISO/F2X: Reduced-Height Second Version Back
Surface Shape Forward-Facing toddler Child Restraint System (height 650mm)
C -
ISO/R3: Full-Size Rearward-Facing toddler Child Restraint System
D - ISO/R2: Reduced-Size
Rearward-Facing toddler Child Restraint System
E - ISO/R1: Infant-Size Rearward-Facing
Child Restraint System
F - ISO/L1: Left Lateral Facing position Child Restraint
System (carry-cot)
G - ISO/L2: Right Lateral Facing position Child Restraint System
(carry-cot)
Securing a Child Restraint System seat with “Top-tether Anchorage” system
Top-tether anchorages for Child Restraint Systems are located on the rear of
the seatbacks.
1. Route the Child Restraint System top-tether strap over the seatback. Placing
the top tether strap, pl ...
Securing a Child Restraint System with a lap/shoulder belt
When not using the ISOFIX system, all Child Restraint Systems must be secured
to a rear seat with the lap part of a lap/shoulder belt.
Installing a Child Restraint System with a lap/shoulder belt
To ...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2.
Putting in a flat tool (Ø5mm) into the guide hole (A) and then release
the DAB fixed pin.
...
Hyundai Kona (OS) 2018-2021 Service Manual: Repair procedures
Replacement
•
When removing the fender, wrap protective tape around a screwdriver
or remover not to damage components
•
Put on ...